How to choose a suitable model for screw filter press?

 

Usually, customers will ask how to choose a screw filter press model. They are afraid that the selected model will be a waste of money, and the selected model will be too small, which will affect the work efficiency. So at this time, you must learn how to calculate the processing capacity and selection method of screw filter press.

Main parameters to know:

1. Sludge (mud volume) to be treated every day, that is, the amount of mud entering.

2. Sludge properties and concentration: Assuming that you need to process 100 cubic meters of mud every day, the screw filter press is theoretically running 24 hours a day, that is, it needs to be processed per hour: 100/24≈4 cubic meters

According to the nature and concentration of your sludge, refer to the table below:

explain:

1. When the sludge is raw water, excess sludge, chemical sludge and the concentration is 0.2%, if you want to process 4 cubic meters per hour, you can choose the TNW132 model or the TNW201 model, generally TNW201 is the majority.

2. When the sludge is raw water, excess sludge, chemical sludge and the concentration is 1.0%, if you want to process 4 cubic meters per hour, you can choose TNW302 model (with excess capacity), 301 can also be achieved in specific experiments. .

3. When the sludge is scum or air flotation sludge, choose TNW302 model.

4. When the sludge is mixed sludge and the concentration is 3%, choose TNW301 model.

5. The first line of the table data is the amount of dry mud, and the second line is the amount of mud entering.

By analogy, you can choose your own type according to your own sludge treatment volume and concentration. You can also inform the merchant about the situation, and let the manufacturer help you choose a suitable model.

 

Note: You can write to us or leave a message at any time to get technical support or solutions.

Email: info@tnwcn.com

Feedback: Click here