What should we do if the screw sludge machine is interrupted unexpectedly?

 

What should we do if the screw sludge machine is interrupted unexpectedly?

Accidents are always unavoidable, and many situations cannot be predicted in advance. What should we do if there is a sudden interruption in the work of the screw sludge machine?

1. First, cut off the power immediately, and then check whether there is a mechanical failure and which component is broken. The replacement of the replacement and the maintenance of the maintenance. Correct any component causes and restart the test.

2. When the equipment encounters an emergency, it is necessary to immediately press the stop button to stop the screw sludge. If you want to restart the sludge dehydrator after the situation is eliminated, please rotate in the direction of the arrow on the emergency stop button.

How to avoid this situation?

During the operation of the sludge dehydrator, the operator must pay attention to its operation at all times. If any abnormality is found, stop the machine immediately to find out the cause. After the fault is eliminated, restart the machine. Check whether all the equipment is in normal condition. Add lubricating oil to the designated position regularly!

 

Note: You can write to us or leave a message at any time to get technical support or solutions.

Email: info@tnwcn.com

Feedback: Click here