How to adjust the moisture content of sludge dewatering press through the back pressure plate?

 

How to adjust the moisture content of sludge dewatering press through the back pressure plate?

1. Adjust the clearance of the back pressure plate to increase the pressure in the main body of the sludge dewatering press, thus reducing the water content.

2. The operation method of increasing the water content through the back pressure plate: increase the gap of the back pressure plate, reduce the pressure in the main body, and thus increase the water content.

Serious attention:

1. Do not adjust the clearance of the back pressure plate to less than 4mm!

2. The smaller the clearance of the back pressure plate, the lower the moisture content of the mud cake, but it will also cause a greater burden on the machine, which is easy to cause damage to related accessories and reduce the life of the spiral shaft.

 

Note: You can write to us or leave a message at any time to get technical support or solutions.

Email: info@tnwcn.com

Feedback: Click here