Self-cleaning spray system for sludge dehydrator

 

The sludge dehydrator is different from the traditional plate type and belt type dehydration filter press. It adopts a filter press system composed of a screw shaft and a ring sheet. Due to the mutual movement between the dynamic ring and the static ring, the self-cleaning between the rings is completed. process. In addition, there are backwashing devices on both sides of the upper part of the sludge dehydrator screw shaft.

Why install a sprinkler system?

1. The dehydration process of the sludge dehydrator operates in a relatively closed main body, and the spray system can effectively clean the crevice residue.

2. Part of the sludge is very sticky and needs to be cleaned to avoid clogging.

3. Even if the moving ring and the static ring move relatively, the blockage has been prevented to the greatest extent possible, but after installing the spray system, the machine can run safely without blockage.

Water pressure and water consumption of sprinkler system:

The water pressure for backwashing is generally 1.5Mpa, and the cleaning water consumption varies according to the model of the machine, generally 20L~200L/h

Please refer to the following table for specific models of cleaning water:

 

Note: You can write to us or leave a message at any time to get technical support or solutions.

Email: info@tnwcn.com

Feedback: Click here