The price gap of the screw sludge press

 

screw sludge press is a sludge dewatering equipment with high cost performance and wide application range in the current environmental protection equipment market, which is very popular in the field of sewage sludge treatment. However, many customers found a strange phenomenon when buying machines, that is, the prices of the same type of equipment vary greatly from manufacturer to manufacturer.

The difference of screw sludge press lies in the difference of materials and accessories. For example, the brand of motor may differ by tens of thousands of yuan. The prices of stainless steel raw materials suppliers from different channels and different stainless steel materials will also vary greatly, and the fluctuations in the stainless steel market will also affect the product prices. The spiral shaft is the core part of the equipment, which is difficult to process. The qualified screw shaft shall be tapered, fully welded, with variable pitch and hard coating on the surface. If these materials and accessories are shoddy, the service life and dehydration effect of the equipment may be greatly reduced.

Screw sludge press is very simple to use. Just press the button gently, the sludge pump dosing pump starts to work, and the equipment starts to run! Just press another button to shut down the machine, the machine will automatically shut down after a delay, and the sludge in the spindle will be drained! When workers get off work, just open the back pressing plate or open the manual flushing pipe for flushing and go home from work!

However, the screw sludge press has some disadvantages, such as small sludge output and high sludge moisture content, which cannot hide its advantages. It is currently the most widely used equipment in the sludge dewatering field.

 

Note: You can write to us or leave a message at any time to get technical support or solutions.

Email: info@tnwcn.com

Feedback: Click here